Setting Up Anynet+ (Hdmi-Cec); Using Anynet+ (Hdmi-Cec) - Samsung KR-X14ATSCH-1 E-Manual

Using Anynet+ (HDMI-CEC)

Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
"
You can configure the TV's universal remote function to control third-party cable boxes, Blu-ray players,
and home theaters that do not support HDMI-CEC using the TV's remote control. Refer to the "Controlling
External Devices with the TV Remote - Using the Universal Remote" section for more information.
"
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
"
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not support
Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
"
The TV remote control may not function under certain circumstances. If this occurs, select the Anynet+
device again.
"
Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when those
devices are either in standby mode or turned on.
"
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). With
home theater systems, however, the number of systems that can be controlled is limited to one.
"
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and
the device's digital audio output connector directly to the home theater system.
"
A home theater system that has been connected to the TV using an HDMI cable and an optical cable
supports 2-channel audio only. 5.1-channel audio is, however, available for digital broadcasts with
5.1-channel audio.

Setting Up Anynet+ (HDMI-CEC)

System Anynet+ (HDMI-CEC)
>
Anynet+ (HDMI-CEC)
Select
Anynet+ (HDMI-CEC)
●
Enables/disables Anynet+ (HDMI-CEC). Set to
On
to enable all Anynet+ related features.
Auto Turn Off
●
Turns off Anynet + compatible external devices when the TV is turned off.
"
Some Anynet + compatible devices do not support this feature.
Device search
●
Of external devices connected to the TV, It can be automatically searched the external device
which is supporting Anynet+(HDMI-CEC).
Try Now
System
from the
Try Now
Try Now
Try Now
menu. Enable/disable
Off
to disable all Anynet+ related features. Set to
Anynet+ (HDMI-CEC)
as follows: