Adjusting The 3D Effect - Samsung KR-X14ATSCH-1 E-Manual

Adjusting the 3D Effect

Picture 3D
>
Configure the viewpoint, depth, and other 3D settings for a custom viewing experience.
Adjusting the 3D Viewpoint
●
Picture
Select
viewpoint.
Adjusting the 3D Depth
●
Picture
Select
"
This option cannot be used if 3D mode is set to
Reversing the Left/Right 3D Images
●
Picture
Select
Displaying 3D Content in 2D
●
Picture
Select
"
This function is not available if 3D mode is set to
Adjusting 3D Brightness
●
Picture
Select
select High.
"
This function is only available with the LED H7100, H7150, and H7170 series models.
3D 3D Perspective. Use the adjustment bar shown on the screen to adjust the
> >
3D > Depth. Use the adjustment bar shown on the screen to adjust the depth.
>
3D L/R Change. This option is used to reverse the left and right images.
> >
3D 3D → 2D. This option is used to enable 2D viewing of 3D content.
> >
3D 3D Light Control. Adjust the 3D brightness level. If the screen is too dark,
> >
(Left / Right) or (Top / Bottom).
Of f Of f
(Normal) or (Off).