Maintenance - Makita CL070D Instruction Manual

Corner nozzle +Extension wand (Straight pipe)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
1
2
010021
Cleaning without nozzle
You can pick up powder and dust without nozzle.
010061

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.
After use
When storing the cleaner, hang it from a nail using the
convenient hanger in back.
010037
1. Corner nozzle
2. Extension wand
3. Cleaner body
3
Cleaning
010038
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use
•
Discoloration or cracks may result.
010009
Wash the filter in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried filter may
cause poor suction and shorten the service life of the
motor.
7
gasoline, thinner or the like.