Makita CL070D Instruction Manual page 4

Switch action
1
010016
CAUTION:
Before inserting the battery cartridge into the tool,
•
always check to see that the switch trigger
actuates properly and returns to the "OFF" position
when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before carrying out
any work on the tool.
Disposing of Dust
CAUTION:
Empty the cleaner before it becomes too full, or the
•
suction force weakens.
Be sure to empty out the dust inside the cleaner
•
itself. Failure to do so may cause the filter to be
clogged or the motor to be damaged.
2
010022
In order to drop dust sticking on the filter in the capsule,
tap the capsule 4 or 5 times with your hand.
1. Switch trigger
1. Capsule
2. Suction inlet
1
1
2
010023
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
NOTE:
Dust may spill out when capsule is opened, so be
•
sure to set a garbage bag beneath capsule.
1
2
010024
Remove accumulated dust from inside of capsule and
off of prefilter.
1
2
010025
Twist prefilter in direction of arrow to unfasten securing
lip from cleaner unit and then pull off prefilter.
2
010026
4
1. Capsule
2. Suction inlet
1. Prefilter
2. Capsule
1. Prefilter
2. Securing lip
1. Filter
2. Prefilter
1