Philips HR2358/06 User Manual page 29

Table of Contents

Advertisement

After the flour is poured in the mixing chamber, the weight shown on the display
screen changes a bit after the lid is closed.
After the appliance is plugged in, the chamber lid is removed when the weighing
system is still calibrating.
Strictly follow steps 2, 3 and 4 on page 17
The kneading process does not start and E1 displays on the screen.
There are more than 500g of flour in the mixing chamber.
Make sure that you do not put more than 500g of flour in the mixing chamber for one batch.
The kneading process does not start and E2 displays on the screen.
There are less than 200g of flour in the mixing chamber.
Make sure that you do not put less than 200g of flour in the mixing chamber for one batch.
E3 displays on the screen.
The weighing system has been reset.
When using the appliance, make sure to put it on a flat and stable surface. If the problem
persists, refer to page 31 for the consumer care number to call for assistance.
E4 displays on the screen.
Software in the appliance is not working.
Refer to page 31 for the consumer care number to call for assistance.
E5 displays on the screen.
The total weight exceeds the upper limit of the weighing system (approximately 999
grams).
Unplug the appliance, remove any objects placed on the appliance, empty the mixing
chamber, and start again from step 1 in chapter "Preparing the ingredients" (page 16).
EEEE displays on the screen.
Excessive current is flowing through the circuit.
Pull power plug out of outlet first and then plug in again to reset the appliance.
English
29

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents