Philips HR2358/06 User Manual page 28

The appliance stops during processing, EEEE displays on the screen, the
indicators are flashing quickly, and the alarm sounds.
•
The mixing paddle may be blocked by some foreign objects.
The dough may be too dry.
The wrong program is selected.
Disconnect from the power outlet, clean the pasta and noodle maker, and follow the
user manual again to restart the pasta/noodle making.
Too much leftover dough inside the chamber.
•
The flour is either exposed to moisture before use, or the dough is too wet.
Keep your flour dry during storage. Follow the user manual instructions to restart the
pasta/noodle making.
•
The chamber, the mixing paddle, the shaping disc are not cleaned properly before use.
Make sure all parts are clean before use.
•
The mixing paddle or the chamber is still wet.
Make sure all parts are completely dry before use.
•
Water is not added in the right order.
The flour type is not correct.
Follow the user manual instructions to make pasta/noodle.
Small amount of water is leaking from the appliance.
•
Water is added before the program starts.
Follow the user manual instructions to add water right after the program starts.
The mixing paddle is running idle, and there is no pasta/noodle coming out.
•
The ratio of the flour and water is incorrect.
Disconnect the plug from the power outlet and discard dough. Clean the pasta and
noodle maker, re-measure ingredients correctly and follow the user manual instructions
again to restart the pasta/noodle making.
Unable to make pasta/noodle successfuly with the liquid calculation function.
•
The required liquid amount indicated on the display screen does not apply to some
recipes (for example cookies, gluten free pasta/noodle).
These recipes require you to skip the liquid calculation part. In this case, press the start/
pause button for 3 seconds, and the appliance will start kneading and extruding directly.
English
28