Configuring The Ipp Settings - Konica Minolta bizhub 223 User Manual

6.1 Mac OS X 10.2/10.3/10.4/10.5/10.6

Configuring the IPP settings

[TCP/IP Settings] for the machine
Specify the IP address for the machine.
[IPP Settings] for the machine
In [IPP Settings] for the machine, enable IPP printing.
d
Reference
For details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].
For details on the [IPP Settings] for the machine, refer to the [User's Guide Network Administrator].
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% For OS X 10.5/10.6, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
4
Click the [TCP/IP] tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].
Adding a printer
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Print & Fax] icon.
3
Click [+] on the [Print & Fax] window.
[Printer Browser] appears.
4
Click [IP] or [IP Printer].
5
In [Protocol:], select [Internet Printing Protocol - IPP].
bizhub 423/363/283/223
6
6-9