Appendix: Printing In A Mac Os 9.2 Environment; Before Setting Up The Computer (For Administrators); Preparation Flow; Checking The Lan Cable Connection - Konica Minolta bizhub C754 User Manual

3.8

Appendix: Printing in a Mac OS 9.2 environment

3.8 Appendix: Printing in a Mac OS 9.2 environment
3.8.1

Before Setting Up the Computer (For Administrators)

Preparation flow

In order to use this machine via an AppleTalk connection, you need to take preparatory steps on this machine.
1
Connecting this machine to the network

% Checking the LAN cable connection

2

Configuring the AppleTalk settings

% Enabling AppleTalk
% Setting a printer name
Enter the name of this machine to be displayed in Chooser.
3
Preparation finished.
Checking the LAN cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine.
Configuring the AppleTalk settings
Enable AppleTalk. In addition, enter the name of this machine to be displayed in Chooser.
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
3.8.2

Setting up the computer

Setup flow

This section describes the setup flow for printing from your computer.
1
Preparing the printer driver
% Preparing the printer driver CD-ROM
For the CD-ROM, contact the administrator of this machine.
% Checking the operating systems supported by the printer driver
Check that your computer meets the operating environment requirements of the printer driver.
2
Installing the printer driver to the computer
% Installing the printer driver using the installer
Insert the "Driver CD-ROM Vol. 2" disk into the drive, and install the software by following the on-screen
instructions.
% Adding the printer
Add the printer automatically detected by AppleTalk to the computer.
bizhub C754/C654
3
3-82