BAS
5. AC Power Switch
Switches the main AC power to the BASX power amp On and Off. When this switch is Off, no
controls operate (the BASX power amp cannot be turned On from the front panel or by a trigger
signal).
6. Speaker Terminals
The speaker outputs on the BASX power amp are heavy duty five-way binding posts, which
accept a variety of speaker cables - including those with banana plugs, spade lugs, or bare ends.
7. IEC Power Cord Receptacle
The BASX power amp can be powered by any receptacle that provides either 115 VAC or 230 VAC
at 50/60 Hz. This receptacle accepts a standard removable IEC AC power cable (a high-quality
commercial power cable is included).
X
-300 / A -500 /
A
Page 10
-700
A