Basx A-300 / A-500 / A-700 Front Panel; Standby Button - Emotiva basX A-700 User Manual

BAS
X A-300 / A-500 / A-700 Front Panel
BAS
A-500
Note: The BASX A-300, BASX A-500, and BASX A-700 have identical features and controls, and
differ only in the power and number of amplifier channels they provide. The BASX A-500 is
shown here for illustration.

1. Standby Button

Press to switch the amplifier On; press again to return to Standby; the halo ring around the button
illuminates amber for Standby and blue for On.
Note: In order for the BASX amplifier to operate, the rear panel AC Power Switch must first be
turned On.
2. Status Display Window
This window houses the status LEDs.
Note: The Status LEDs can be disabled by the Status LEDs switch on the rear panel.
Note: In Standby mode the halo ring on the Standby button will be illuminated in amber and
the Status LEDs are not lit; in normal operation the Status LEDs and Standby button are both
illuminated in blue; one or both Status LEDs flashing red indicates a channel fault.
Note: Each BASX amplifier model has one corresponding Status LED for each channel.
Press to switch the amplifier On; press again to return to Standby; the halo ring around the button
will illuminate amber for Standby and blue for On.
Note: In order for the BASX power amp to operate, the rear panel AC Power Switch must first be
turned On.
X -300 / A -500 /
A
1
-700
A
2
Page 8