Monitoring Menu (M1); Monitored Signals - Honeywell NX series User Manual

7
52(86)

Monitoring menu (M1)

7.3.1
The monitoring menu can be entered from the main menu by pushing the
button when the location indication M1 is visible on the first line of the display. How to browse
through the monitored values is presented in Figure 7-4.
The monitored signals carry the indication V#.# and they are listed in Table 7-1. The values are
updated once every 0.3 seconds.
This menu is only for signal checking. The values cannot be altered here. For changing values of
parameters see Chapter 7.3.2.
Figure 7-4. Monitoring menu
Code
V1.1
V1.2
V1.3
V1.4
V1.5
V1.6
V1.7
V1.8
V1.9
V1.10
V1.11
V1.12
V1.13
V1.14
V1.15
Table 7-1. Monitored signals
Note: Other applications may embody more monitoring values.
READY
Local
Monitor
"
V1 V14
Signal name
Output frequency
Frequency reference
Motor speed
Motor current
Motor torque
Motor power
Motor voltage
DC-link voltage
Unit temperature
Voltage input
Current input
DIN1, DIN2, DIN3
DIN4, DIN5, DIN6
DO1, RO1, RO2
Analogue output current
Control keypad
Lo ca l
FreqReference
13.95 Hz
Local
Output frequency
13.95 Hz
Unit Description
Hz Frequency to the motor
Hz
rpm Calculated motor speed
A Measured motor current
% Calculated actual torque/nominal torque of the unit
% Calculated actual power/nominal power of the unit
V Calculated motor voltage
V Measured DC-link voltage
ºC Heat sink temperature
V AI1
mA AI2
Digital input statuses
Digital input statuses
Digital and relay output statuses
mA AO1
Right arrow menu
R EADY
READY