Applications Info Submenu; Counters Menu; Counter Pages - Honeywell NX series User Manual

Nx series constant and variable torque variable speed drives for induction motors
Hide thumbs Also See for NX series:
Table of Contents

Advertisement

Applications info submenu (S6.7.6)
At location S6.7.6 is the Applications submenu containing information about not only the
application currently in use but also all other applications loaded into the frequency converter. The
information available is:
1. Application identification number
2. Application version number
3. Firmware interface number
In the Application information submenu, push the
pages of which there are as many as there are applications loaded into the frequency converter.
Locate the application you want information about with the
Information pages with the
different pages.
I/O term
Applications
"
A1
Figure 7-23. Applications info submenu
7.3.6.8

Counters menu

In the Counters menu (S6.8) is information related to the frequency converter operation times, i.e.
the total numbers of MWh, operation days and operation hours passed so far. Unlike the counters
in the Trip counters submenu, these counters cannot be reset.
Note! The operation time counter (days and hours) runs always, when the power is on.
Page
Counter
C6.8.1.
MWh counter
C6.8.2.
Operation day counter
C6.8.3.
Operation hour counter
Table 7-7. Counter pages
Control keypad
right arrow menu
Standard
READY
Basic
A7
right arrow menu button
Browser buttons
button. Use again the Browser buttons to see the
READY
I/Oterm
D3
D1
"
READY
I/O term
D3
"
D1
77(86)
to enter the Application
and then enter the
I/Oterm
Version
I/O term
Application id
NXFIFF01
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents