Fault History Menu (M5) - Honeywell NX series User Manual

Fault history menu (M5)

7.3.5
The Fault history menu can be entered from the Main menu by pushing the
button Menu button right
display.
All faults are stored in the Fault history menu, Browse through them using the
Additionally, the Fault time data record pages (see Chapter 7.3.4.3) are accessible at each fault.
Return to the previous menu anytime by pushing the
The memory of the frequency converter can store a maximum of 30 faults in the order of
appearance. The number of faults currently in the fault history is shown on the
main page (H1# # # # H#). The order of the faults is indicated by the
corner of the display. The latest fault carries the indication F5.1, the second latest F5.2 etc. If
there are 30 uncleared faults in the memory the next occurring fault will erase the oldest from the
memory.
Pressing the Enter button
H# will change to 0.
READY
I/Oterm
Fault history
H3
"
H1
Figure 7-8. Fault history menu
Control keypad
when the location indication M5 is visible on the first line of the keypad
for about 2 to 3 seconds resets the whole fault history. Then, the symbol
I/Oterm
5 ChargeSwitch
I/Oterm
11 Output phase
PUSH
Menu button left.
location indication
R EADY
READY
"
T1 T7
to reset
enter
63(86)
right arrow menu
Browser buttons.
value line
in the upper left
I/Oter m
Operation hours
I/Oterm
Operation days
17
7
of the