Denon DN-508MX User Manual page 15

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Mute: Click one of these buttons to
mute either the music only (Music) or all
audio signals (All).
Ethernet: Use these controls to configure
your Ethernet settings. Click one of the
Mode buttons to set them to detect the
network settings automatically (Auto) or
to use the settings you enter yourself
(Manual). Click the IP Address, Subnet
Mask, Gateway, or IP Control Port fields
and enter the numbers for each using
your computer keyboard.
Baudrate: Click one of the buttons for
each port to set the baud rate of each
one. RS232C is for the remote port.
RS422 is for the RS-422 port. Each rate
is shown bits per second (BPS).
Time: Click each menu next to System
Time to set the current month, day, year,
hour, minute, and second. DN-508MX
will display this at the top of the web
interface and will use it for scheduling.
Click one of the Enable buttons to enable (On) or disable (Off) daylight saving time. When on,
click each menu below it to set the month, day, and hour that daylight saving will start and end.
Click the Offset menu to select how much the time will be shifted.
Password: Use these fields to set a new
password for the administrator (Admin),
which
can
control
functions, or the operator (Operator),
which can control only certain functions.
Click each field and enter the characters
for
your
current
Password) and the new password twice
(New
Password
Password). Click Save to save the new
password.
Important: The default administrator
password is adminpwd. There is no
default operator password.
Firmware: This field shows the DN-
508MX firmware file to upload, if any. To
upload
a
firmware
computer to DN-508MX, click Browse,
and then find and select the file. After
that, click Verify to confirm the file is
valid. If it is valid, then click Execute to
update the firmware.
Important:
Visit
download the latest firmware for DN-
508MX.
Information: This section shows the current network addresses (as set in the Ethernet section)
and firmware version (as set in the Firmware section).
all
DN-508MX
password
(Old
and
Confirm
file
from
your
denonpro.com
to
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents