Pioneer REKORDBOX Operating Instructions Manual page 219

JOG
Continuous
Playing
Hot Cue
Auto Beat
Loop
Mixer Auto Gain
EQ
Channel
Fader Curve
Crossfader
Curve
Output Level
Auto Cue threshold: Select from the followings (common
for all DECKs).
－78dB/－72dB/－66dB/－60dB/－54dB/－48dB/－42dB/
－36dB
JOG rotation speed:
rotation speed of the virtual deck.
Selects
After turning on the CUE button and spinning the JOG, the track
returns to the CUE point and pause.
Automatically load tracks in a list and have them play
continuously one after another when it is enabled.
When it is enabled, Playback starts while the Hot Cue
Button is pressed during PAUSE. When Hot Cue button is
released, the playback position returns to the Hot Cue
position and track pauses.
Select Loop length when Auto Beat Loop button/knob is
pressed on the connected hardware (DDJ/XDJ series).
Select [Enable], and audio volume of the track loaded to a
deck is automatically adjusted.
Select [EQ] or [ISOLATOR].
When [EQ] is selected, you can select the following EQ
types.
- DJM-900NXS
- DJM-900NXS2
Sets Channel fader curve.
Sets crossfader curve.
You can adjust audio output level by changing the
headroom.
0 dB (high level of audio output)
-3 dB
-6 dB
-9 dB
-12 dB (low level of audio output)
Audio output increases when you set the headroom lower,
however clipping is likely to occur when applying effects.
218