Pioneer REKORDBOX Operating Instructions Manual page 142

Auto Cue
When Auto Cue is enabled, a cue point is set at the beginning of a track (the position of the
first audio input) according to the selected Auto Cue Level (threshold of sound pressure).
When a track is loaded, the track will pause at the position.
You can select [Enable] or [Disable] Auto Cue per deck and threshold for Auto Cue Level at
[Preferences] > [Controller] > [Deck] > [Auto Cue].

When Auto Cue is enabled, the track will pause when it is loaded even the deck is
playing.

If you tick the checkbox for [Playback starts at Memory/Hot Cue nearest to the
beginning of the track] at [Preferences] > [Controller] > [Deck] > [Load] > [Load
Setting], this setting is prioritized than Auto Cue setting.
Track Information part
Selection of PAD MODE 1/PAD MODE 2/ MEMORY CUE / GRID
Click the bottom of deck number (▼) to select PAD MODE1/ PAD MODE2/ MEMORY
CUE/GRID edit from the menu.
Artwork image
Artwork image is shown here. You can unload the track if you click the artwork image.
141
is shown on the deck.