Pioneer REKORDBOX Operating Instructions Manual page 216

Beat Count Sets the way to count the bars or beats: 1) from the start to the current
Display playing position, 2) from the current position to the nearest cue point
(bars/beats).
Switch JOG Switch information on the virtual deck.
・[Current Cue / Slip]
display
Indicates cue point.
Indicates SLIP status and cue point when SLIP is turned on.
・[Hot cue countdown]
Indicates distance to HOT Cue within 5 laps.
Color Hot Cue
PAD FX
Sampler
Preferences: Audio
Metronome Sets the sound of the metronome while you are monitoring beat grids of
music files.
Audio Designates the audio output device.
Sample Rate Sets the sampling frequency of audio data sent to an audio device.
The higher the sampling rate, the closer to the original audio you can
playback the track. However, as the data amount of the audio increases,
the load on the audio device also increases, resulting in more audio
skipping (audio interruption).
Buffer Size Sets the number of samples sent to an audio device for each data
transmission.
Set colors of Hot Cues
CDJ: Displays Hot Cues in green and Hot Loop umber
COLD1: Displays in blue and green
COLD2: Displays in blue gradation
COLORFUL: displays in multicolor mode
Sets color of PAD FX
Selects color setting of sampler as follows: 1) the color is
set corresponding to the frequency of the sampler sound
or 2) fixed color (purple).
When the color is manually set, samplers are shown in
the set color regardless of the selection here.
215