Beat Fx; To Change Effect Mode Of Beat Fx - Pioneer REKORDBOX Operating Instructions Manual

Apply FX to sampler deck
Click .
The [S] button lights up and FX is applied to the sampler deck.
Click again to cancel the assignment.
Assign FX to master out
Click .
The [M] button lights up and FX is applied to the master out.
Click it again to cancel the assignment.
If you assign FX to the master out, you cannot assign that FX to any other decks or the
sampler deck.
If you assign FX to the master out even when deck 1 to 4 and sampler decks are already
assigned, the assignment to deck 1 to 4 and sampler deck are disabled.

BEAT FX

5.7.3
Using BEAT FX, you can use various effects matching to tempo (BPM) of a track loaded to
the deck. Furthermore, you can control two effect units, FX1 and FX2, allowing you to assign
a deck for each unit freely.
BEAT FX has two effect modes: single-mode and multi-mode.
5.7.4

To change effect mode of BEAT FX

Set BEAT FX to multi-mode
Click button.
The mode is switched to multi-mode.
180