Using Instant Double Function - Pioneer REKORDBOX Operating Instructions Manual

Click the quantize button
function.
The button turns
Setting Quantize function to a sampler deck
Click the Quantize button
The button turns
1. Settings of SYNC and QUANTIZE
When BEAT SYNC and QUANTIZE functions are turned on, you can keep the rhythm with
beat position synced even when you play Hot Cues and LOOP.
Note: BEAT SYNC of tracks is disabled in the following cases:

If you set QUANTIZE Beat with fraction beat (1/16，1/8，1/4，1/2)

Fraction LOOP (1/32～1/2)

5.3.11 Using Instant Double function

(Note: This function is only available when a controller is connected.)
When you call up the Instant Double function on a controller, a track on a deck will be loaded
to another deck with the status and the state copied over such as a playing position, a loop
and its state of On /Off, Pad mode, and Slip mode state of On/Off, etc.; then, the track on a
deck copied to will start playing from the same playing position of the deck copied from.
How to call up the Instant Double function depends on the controller. See the Operation
Instructions of each controller.
For example, push the load button twice to call up the instant double function.
on a deck where you wish to turn on the Quantize
and the Quantize function is turned on.
at a sampler deck
and Quantize function is turned on.
169