Table of Contents
Advertisement
Extract the whole slicing range
1
Click the [SLICER] mode button. (See 5.10.1 Slicer for how to use the slicer
function.)
2
The Deck turns in the slicer mode.
3
Click
to the right of the enlarged waveform.
The color of the slicing range changes and the range to extract is set.
4
Drag the waveform part of the slicing range and drop to the sampler deck of
eight sampler slots in either right or left section.
The audio source is extracted, divided in eight, loaded to eight sampler slot respectively,
and ready to be used as a sampler.
The extracted audio source is stored at [Collection] and [Sampler] > [Capture].
When [Do not load the loaded slot] is ticked at [Preferences] > [Controller] > [Sampler],
you cannot drag and drop the slicing range to the sampler deck if something is already
loaded in any slots.
209
Advertisement
Table of Contents
