Table of Contents
Advertisement
2.
Scratch (JOG operation)
3.
Playback/Pause
4.
Loop
5.
Reverse playback (only using a controller)
To enable/disable slip mode
The slip mode can be set per a deck.
Click
button on the deck to enable the slip mode. The button turns
Click
button to disable the slip mode. The button returns to
Slip hot cue
When the slip mode is on, hot cues behave as follows:
1
While clicking a performance pad, playback starts from the saved hot cue
point. (This is the same behavior when slip mode is off).
2
When the pad is released, the playback resumes from the last point the track
was playing at in the background.
Slip scratch (JOG operation)
When the slip mode is on, scratch playing behaves as follows:
1
While playback, play scratching using top of the JOG dial of the controller
Real-time playback continues in the background while scratch-playing.
2
Release the top of the JOG dial.
3
The playback resumes from the point the track reached in the background.
165
.
.
Advertisement
Table of Contents
