OPERATING THE ELECTRIC KETTLE
CMD + SHIFT CLICK TO CHANGE COPY
Before first use
Before first use, fill the Electric Kettle to the maximum level, then boil and discard
The temperature can be displayed in Celsius (C) or Fahrenheit (F). To change settings,
hold the "-" and "+" buttons down at the same time.
NOTE: The Electric Kettle is designed for water only. Do not put any other liquids
or substances in the Electric Kettle.
Filling the Electric Kettle with water
Open the lid of the Electric Kettle
by pressing the Lid Release Button.
NOTE: There must be a minimum of .25 L of water for Electric Kettle to operate. Do not
exceed the "Max" fill line.
Push the lid down so it locks into
the closed position. You will hear
a clicking sound which indicates
the lid is locked.
Fill Electric Kettle. The water level is
displayed in .25 L increments. If there is
no water in the kettle, the water drop
icon will display and the alert tone will
sound for 6 seconds. Remove water if it
exceeds the "Max" line.
Place the Electric Kettle on the base.
6/23/14 9:53 AM