Using The Electric Kettle; Operating The Electric Kettle - KitchenAid KEK1565 User Manual

Table of Contents

Advertisement

Available languages

Available languages

USING THE ELECTRIC KETTLE

OPERATING THE ELECTRIC KETTLE

Before using your Electric Kettle for the first time, wash the Kettle and lid in hot, soapy water,
then rinse with clean water and dry. Fill the Electric Kettle with water to the MAX fill line; boil
the water and then discard. To avoid damage, do not fully immerse the Electric Kettle in water,
and do not use abrasive cleaners or scouring pads.
1
NOTE: Water must be at or above the MIN fill line for the Electric Kettle to operate. Do not
exceed the MAX fill line.
2
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
3
4
Open the lid of the Electric Kettle by pressing the lid
release button, then fill the Electric Kettle with clean,
cold water.
Push the lid down so that it is completely closed.
WARNING
Electrical Shock Hazard
Place the Electric Kettle on the base, and plug the
power cord into a grounded 3 prong outlet.
Flip the on/off switch down; the On indicator will light
and the Electric Kettle will begin heating the water.
USING THE ELECTRIC KETTLE | 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents