Operating The Electric Kettle; Before First Use; Heating Water - KitchenAid KEK1222OB0 Instructions Manual

OPERATING THE ELECTRIC KETTLE

Before first use

Before first use, fill the Electric Kettle to the maximum level, then boil and discard the water.
If the cord is too short, turn the Kettle base over and unwrap any additional cord needed to
plug in where desired.
NOTE: The Electric Kettle is designed for water only. Do not put any other liquids
or substances in the Electric Kettle.

Heating water_

Remove the lid from the kettle. Fill the
1
electric kettle with water.
Place the electric kettle on the base.
3
You may also turn it off by raising the
5
switch to the OFF position.
Replace the lid.
2
Turn the electric kettle ON by
4
pressing the ON/OFF switch down.
The LED indicator will light. Kettle
will automatically turn OFF when
water has finished boiling.
Unplug cord when Electric Kettle is
6
not in use.
7