Setting The Temperature; Setting The Temperature In The Refrigerator And Freezer Sections - Miele KFN 9753 iD Operating And Installation Instructions

Setting the temperature

Temperature range
The temperature can be selected within
the following ranges:
– Refrigerator:
39°F (4° C) to 48°F (9° C).
A temperature of 39°F (4° C) is
recommended in the refrigerator
section.
– Freezer:
3°F (-16° C) to -15 (-26° C).
To freeze fresh food and store frozen
food for an extended period of time, a
temperature of 0°F (-18°C) is
suggested.
Partially or completely thawed food
must never be refrozen.
The room temperature and the
installation location can affect the time it
takes for the appliance to get to the
desired temperature. If the room
temperature is too high, it may not be
possible for the appliance to reach the
lowest temperature.
Downloaded from Fridge-Manual.com Manuals
12
Setting the temperature in the
refrigerator and freezer
sections
The temperatures for the refrigerator
and freezer sections can be set
independently using the temperature
selection buttons.
+ button: increases the temperature
- button: decreases the temperature
The temperature being set will flash in
the display.
When pressing the buttons the
following information appears in the
display:
– When first pressed: The last
selected temperature flashes.
– Each subsequent press of the button
adjusts the temperature in
increments of 1 °F (1°C).
– Holding down the button will move
through the temperature range
quickly.
Approx. 5 seconds after releasing the
button the current, average
temperature in the refrigerator or
freezer section is automatically shown.
If the temperature is adjusted, wait
approx. 6 hours (or 24 hours for a fully
loaded appliance) for the temperature
display to show an accurate reading. If
after this time the temperature is still too
high or low, try adjusting it again.