Preparing The Appliance - Miele KFN 9753 iD Operating And Installation Instructions

Installing the appliance

Preparing the appliance

^ Slide the cover strip a (nobs facing
downwards) into the holder. The
nobs will fit into the holes b.
^ Ensure that the power cord can be
easily plugged in once the appliance
is installed.
^ Screw the provided fixing brackets c
into the pre-drilled holes in the
appliance door using a hex screw d.
(If the custom door panel is large,
screw on an additional pair of brackets
c near the door handle.)
Downloaded from Fridge-Manual.com Manuals
44
^ Push the appliance two-thirds of the
way into the installation niche.
Ensure that the power cord does not
get caught.
^ For 16 mm cabinetry walls only:
Clip the spacers e and f onto the
upper and lower hinges.