Technical Data; Before Use - Hilti DX 351-CT Operating Instructions Manual

Additional accessories
3FT extension
1FT extension
Woven fabric shoulder bag
Cartridge type
Heavy
Medium
Light

5 Technical data

Right of technical changes reserved.
Description
DX 351‑CT tool (main unit, piston,
fastener guide)
X‑PT CT‑351 grip
3FT extension
1FT extension
DX 351‑CT tool
Contact movement
Trigger force
Ambient operating temperature range

6 Before use

NOTE
Read the operating instructions before the tool is oper-
ated for the first time.
Printed: 17.04.2014 | Doc-Nr: PUB / 5069829 / 000 / 03
Weight
2.7 kg (5.95 lb)
0.9 kg (2 lb)
0.5 kg (1.2 lb)
0.2 kg (0.5 lb)
62 mm (2.4")
140...320 N
-15...+45°C (5°F to 113°F)
6.1 Check the tool
Check that no cartridge strip is loaded in the tool. If a
cartridge strip is present in the tool, remove the strip by
pulling it out.
Check all external parts of the tool for damage and check
that all controls operate faultlessly. Do not operate the
tool when parts are damaged or when the controls do not
function correctly. If necessary, have the tool repaired at
an authorized Hilti service center.
Check the piston and piston brake for wear and ensure
that the parts have been fitted correctly.
Ordering designation
X‑PT CT‑351 3FT
X‑PT CT‑351 1FT
X‑PT CT
Ordering designation
6.8/11 M red
6.8/11 M yellow
6.8/11 M green
Dimensions (L x W x H)
545 mm X 55 mm X 164 mm
(21.4" x 6.4" x 2.1")
935 mm x ∅35.5 mm (36.8" x 1.4")
915 mm x ∅30 mm (36" x 1.2")
288 mm x ∅30 mm (12" x 1.2")
en
19