Remove The Suction Head Hood; Install The Suction Head Hood - Kärcher NT 14/1 Service Manual

5.3 Remove the suction head hood

8 4 4
7
1 Support
2 Fastening screws for cable intake
3 Fastening screws for hood
4 Fastening screw for carrying handle
5 Carrying handle
6 hood
7 Filter cover
8 Device switch button

Unscrew the fastening screws for the carrying
handle.

Remove the carrying handle.

Remove the device switch button.

Remove the filter cover.

Unscrew the fastening screws for the cable intake.
(Eco Te and Advanced only)

Remove the holders.

Unscrew the fastening screws for the hood.

Remove the hood.
8
English 5.906-492.0 Rev. 00 (12/10)
6 5 4 3 2
3 3 2
1
5 4
1 Filter cover
2 Suction head casing
3 Power switch
4 Pressure spring
5 Device switch button

5.4 Install the suction head hood

1 hood
2 Socket casing
Note: During the installation of the hood, make sure
that the guides of the socket casing (see arrows) and
the hood engage.

Remove the flat fold filter before installing the
hood.
3 2 1
2 1