Troubleshooting - Beem Waffel-Flipp User Manual

Waffel-Flipp
The following table helps in localising and remedying minor faults:
Fault
The power indicator does
not light up after inserting
the mains plug.
The temperature indicator
lamp does not light up dur-
ing heating.
The automatic circuit
breaker in the electrical
distribution board trips.
Waffle mixture oozes out
of the sides.
NOTE!
► If you cannot resolve the problem with the steps described above, please contact
customer service.
26

Troubleshooting

Possible cause
Automatic circuit breaker in
electrical distribution board
tripped.
Power indicator defective.
Temperature indicator light
defective.
Too many appliances connect-
ed to the same power circuit.
No fault detected.
Too much waffle mixture filled.
Remedy
Switch on the automatic
circuit breaker again.
Contact customer
service.
Contact customer
service.
Reduce the number of
appliances on the power
circuit.
Contact customer
service.
Fill with less waffle
mixture.
BEEM - Elements of Lifestyle
EN