Overview Menu Section B - Danfoss ULX 1800o User Manual

2.1.6. Overview Menu Section B

The table below gives an overview of the menu structure. The two menu levels are clearly indicated
by an arrow followed by a submenu. The values shown are only intended as examples of display
texts.
The display text (shown in the first column Display Functions ) is divided between 2 lines, with 16
characters available per line. The line division is illustrated with the symbol |.
Menu Structure B
Display Functions
Operation mode | STANDBY
PV configuration | IDLE
Event: Mod. | ENS FL. CH DCAC
Language | ENGLISH
Grid voltage | 0 V
Grid current | 0.00 A
Grid frequency | 0.00 Hz
Grid impedance | 0.0 ohm
PV voltage | Press OK to view
↳
Submenu
PV voltage no. 1 | 303.0 V
PV voltage no. 2 | 303.0 V
PV voltage no. 3 | 303.0 V
PV current | PRESS OK to view
↳
Submenu
PV current no. 1 | 0.0 A
PV current no. 2 | 0.0 A
PV current no. 3 | 0.0 A
Maximum values | Press OK to view
↳
Submenu
AC out: 1844 W | 8.356 A 263 V
DC1 in: 2220 W** | 8.004 A 509 V
DC2 in: 2220 W** | 8.004 A 509 V
DC3 in: 2220 W** | 8.004 A 509 V
Table 2.3: Overview Menu Structure B
*) The PV2 and PV3 menus are only displayed in inverters equipped with two or three inputs.
Description
Displays present inverter operation mode. See operation mode definitions
in chapter 2.
Shows the status of the automatic PV configuration test and the results
found.
If the inverter is not connected to the grid because of a failure, the red
LED starts flashing, and the reason for the failure is shown here.
View and choose display language. Does not affect any other settings.
Displays the present grid AC voltage.
Displays the present current flow to the grid.
Displays the present grid frequency.
Displays the present grid impedance.
Press OK to access submenu for recorded values.
Present voltage at PV input 1 (upper position in inverter).
Present voltage at PV input 2 (second position in inverter)*.
Present voltage at PV input 3 (third position in inverter)*.
Press OK to access submenu for recorded values.
Present current at PV input 1 (upper position in inverter).
Present current at PV input 2 (second position in inverter)*.
Present current at PV input 3 (third position in inverter)*.
Press OK to access submenu for recorded values.
Maximum values recorded at AC output since last resetting of max. value
memory.
Maximum values recorded at DC1 input since last resetting of max. value
memory.
Maximum values recorded at DC2* input since last resetting of max. value
memory.
Maximum values recorded at DC3* input since last resetting of max. value
memory.
L00410362-05_2q
2. Function Description
7
2