Error Messages - Pentax K-70 Operating Manual

u Caution
• Never use a spray blower or a blower with a brush. The
CMOS sensor may be damaged. Do not wipe the CMOS
sensor with a cloth.
• Do not put the tip of the blower inside the lens mount area. If
the power is turned off during cleaning, it may cause damage
to the shutter, the CMOS sensor, and the mirror. Hold the
camera with the lens mount down while cleaning the sensor
so dust will fall away from the sensor when the blower is used.
• When the battery level is low, the message [Not enough
battery power remaining to clean sensor] is displayed on the
monitor. Install a fully charged battery. If the battery capacity
becomes low during cleaning, a warning beep will sound. In
this case, stop cleaning immediately.
t Memo
• Please contact your nearest service center for professional
cleaning as the CMOS sensor is a precision part.
• You can use the optional Image Sensor Cleaning Kit O-ICK1
when cleaning the CMOS sensor.

Error Messages

Error Messages
The memory card is full and no more
Memory card full images can be saved. Insert a new
memory card or delete unwanted files.
There are no images that can be played
No image
back on the memory card.
You are trying to play back an image in a
This image cannot
format not supported by this camera. You
be displayed
may be able to play it back on a computer.
There is no memory card inserted in the
No card in the camera
camera.
The memory card has a problem, and
image capture and playback are
Memory card error
impossible. You may be able to play back
or recover the images on a computer.
The memory card you have inserted is
unformatted or has been previously used
Card is not formatted on another device and is not compatible
with this camera. Use the card after
formatting it with this camera.
The write-protect switch on the memory
Card is locked
card you have inserted is locked. (p.146)
A memory card not compatible with this
Cannot use this card
camera is inserted.
The capture mode is changed to C
Wi-Fi connection disabled mode while the wireless LAN function is
enabled.
This image cannot You are trying to magnify an image that
be magnified cannot be magnified.
You are trying to delete an image that is
This image is protected protected. Remove the protection from
the image. (p.114)
Description
7
131