Pentax K-70 Operating Manual page 134

Table of Contents

Advertisement

Error Messages
Not enough battery
power remaining to
activate Pixel Mapping
Not enough battery
power remaining to
clean sensor
Not enough battery
power remaining to
update the firmware
Unable to update firmware.
There is a problem with the
firmware update file
Image folder cannot
be created
Unable to store image
The operation could not be
completed correctly
7
No more images
can be selected
No image can be processed
This image cannot
be processed
132
Description
These messages appear when you try to
perform Pixel Mapping or Sensor
Cleaning, or to update the firmware if the
battery level is insufficient. Install a fully
charged battery.
The firmware cannot be updated. The
update file is damaged. Try downloading
the update file again.
The maximum folder number (999) is
being used, and no more images can be
saved. Insert a new memory card or
format the card.
The image could not be saved because of
a memory card error.
The operation failed. Try the operation
again.
You are trying to select more than the
maximum number of images for the
following functions.
• Select & Delete
• RAW Development
• Protect
There are no images that can be
processed using the Digital Filter or RAW
Development function.
This message appears when you try to
perform Resize, Cropping, Digital Filter,
Movie Edit, RAW Development, or Save
as Manual WB for images captured with
other cameras, or when you try to perform
Resize or Cropping for minimum file size
images.
Error Messages
You are trying to set a function that is not
This function is not available
available with the currently selected
in the current mode
capture mode.
The camera will turn off because its
The camera will turn off
internal temperature is too high. Leave
to prevent damage from
the camera turned off until it has had time
overheating
to cool down before turning on the
camera again.
Shutter release is disabled.
Pictures cannot be taken when a
Ensure the zooming index on
retractable lens is attached and is not
the lens is set to a position
extended. (p.46)
that permits shutter release
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents