Copying An Image To A Computer; Sharing Images - Pentax K-70 Operating Manual

Copying an Image to a Computer

Connect the camera to a computer using a USB cable.
Make sure to have a commercially available USB cable
equipped with a micro B terminal.
1
Turn the computer on.
2
Turn the camera off.
3
Open the terminal cover of
the camera, and connect
the USB cable to the USB
5
terminal.
4
Connect the USB cable to the USB port of the
computer.
5
Turn the camera on.
The camera is recognized as a removable disk.
6
Save the captured images to the computer.
7
Disconnect the camera from the computer.
94
u Caution
• The camera cannot be operated while it is connected to a
computer. To operate the camera, terminate the USB
connection on the computer first, then turn off the camera and
remove the USB cable.
• If the "K-70" dialog appears on the computer screen in Step
5, select [Open folder to view files] and click the OK button.
t Memo
• Refer to "Operating Environment for USB Connection and
Provided Software" (p.139) for system requirements to
connect the camera to a computer with a commercially
available USB cable and to use the software.
• The USB connection mode when connecting the camera to a
computer can be set in [USB Connection] of the D3 menu.
Normally, you do not need to change the default setting
([MSC]).
• If you intend to use the camera continuously for a long period,
the use of the optional AC adapter kit is recommended. (p.39)