Pentax K-70 Operating Manual page 37

Menu Item
15 AWB in Tungsten Light
16 WB When Using Flash
17 Color Temperature Steps
E3
18 4-way Controller Settings
19 Auto SR Off
20 Save Rotation Info
21 Save Menu Location
22 Catch-in Focus
23 AF Fine Adjustment
E4
24 Using Aperture Ring
Reset Custom Functions
Function
Sets the tungsten light color tone when the white balance is
set to [Auto White Balance].
Sets the white balance setting when using a flash.
Sets the adjustment steps for the Color Temperature option
of the white balance.
Selects the operation of the arrow keys (ABCD) when the
focusing area selection mode is set to one of some select-
type options.
Automatically turns off the Shake Reduction function when
the drive mode is set to [Self-timer] or [Remote Control].
Saves rotation information when shooting.
Saves the last menu tab displayed on the monitor and
displays it again the next time F is pressed.
Enables Catch-in Focus shooting when a manual focus lens
is attached. The shutter is released automatically when the
subject comes into focus.
Allows you to precisely fine-tune your lenses with the
camera's autofocus system.
Enables the shutter to release when the lens aperture ring is
set to a position other than 9 (Auto).
Resets the settings of the Custom Setting menus to the
defaults.
Default Setting Page
Strong
p.73
Correction
Auto White
p.73
Balance
Kelvin p.75
Type1 p.63
Enable Auto
p.66
SR Off
On p.86
Reset Menu
p.23
Location
Off p.124
Off p.65
Disable p.123
– –
1
35