Setting The Drive Mode; Af Fine Adjustment - Pentax K-70 Operating Manual

AF Fine Adjustment

You can precisely fine-tune your lenses with the camera's
autofocus system.
1
Select [23 AF Fine Adjustment] in E4 menu and
press D.
The [23 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
Apply All Applies the same adjustment value to all lenses.
Saves an adjustment value for the lens being
Apply One
used. (Up to 20 values)
3
Select [Setting] and adjust
the value.
Available operations
D/R to the right
C/R to the left
M
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
E4
23 23 AF Fine Adjustment AF Fine Adjustment
3 3 Apply One Apply One
Setting Setting
Reset Individual Settings Reset Individual Settings
±0 ±0
Cancel Cancel
Adjusts the focus to a closer
position.
Adjusts the focus to a farther
position.
Resets the adjustment value to
the default setting.

Setting the Drive Mode

1
Press D in standby mode.
The Drive Mode screen appears.
2
Select a drive mode.
Single Frame Shooting
(L)
Continuous Shooting
(Z, b)
±0 ±0
Self-timer
(O, P, Y)
Save Save
Remote Control
(Q, R, S)
Bracketing
(T, 1, U)
Mirror Lock-up
Shooting
(c, d)
Multi-exposure
(V, z, W, X)
Interval Shooting
(q, U, V, w)
Single Frame Shooting Single Frame Shooting
Cancel Cancel
Normal capture mode
Continuously takes pictures while
0 is kept pressed. (p.66)
Releases the shutter about 12
seconds or 2 seconds after
0 is pressed. (p.67)
Enables shooting with remote
control. (p.67)
Takes consecutive pictures at
different exposure levels. (p.68)
Takes pictures with the mirror
raised. (p.69)
Creates a composite image by
taking multiple pictures and
merging them into a single image.
(p.70)
Automatically takes pictures at set
intervals. (p.71)
3
OK OK
65