Error Messages - Pentax K-3 Operating Manual

Error Messages

Error Messages
Memory card full
No image
This image cannot be
displayed
No card in the camera
Memory card error
6
Card is not formatted
Card is locked
This image cannot be
magnified
This image is protected
88
Description
The memory card is full and no more
images can be saved. Insert a new
memory card or delete unwanted files.
There are no images that can be played
back on the memory card.
You are trying to play back an image in a
format not supported by this camera. You
may be able to play it back on a computer.
There is no memory card inserted in the
camera.
The memory card has a problem, and
image capture and playback are
impossible. You may be able to play it
back on a computer.
Failed to initialize the Eye-Fi function
when using the Eye-Fi card. Press E.
The memory card you have inserted is
unformatted or has been previously used
on another device and is not compatible
with this camera. Use the card after
formatting it with this camera.
The write-protect switch on the memory
card you have inserted is locked. (p.102)
You are trying to magnify an image that
cannot be magnified.
You are trying to delete an image that is
protected. Remove protection from the
image. (p.75)
Error Messages
Not enough battery
power remaining to
activate Pixel Mapping
Appears during Pixel Mapping, Sensor
Not enough battery
Cleaning, or when trying to update the
power remaining to
firmware if the battery level is insufficient.
clean sensor
Install a fully charged battery.
Not enough battery
power remaining to
update the firmware
Unable to update firmware. Unable to update the firmware. The
There is a problem with the update file is damaged. Try downloading
firmware update file the update file again.
The maximum folder number (999) is
Image folder cannot be being used, and no more images can be
created saved. Insert a new memory card or
format the card.
The image could not be saved because of
Unable to store image
a memory card error.
The camera was unable to adjust the
The operation could not be
manual white balance. Try the operation
completed correctly
again.
You are trying to select more than the
maximum number of images for the
following functions.
• Select & Delete
No more images
• Image Copy
can be selected
• Index
• RAW Development
• Protect
• Eye-Fi Image Transfer
There are no images that can be
No image can be processed processed using the Digital Filter or RAW
Development function.
Appears when you try to perform Resize,
Cropping, Digital Filter, Movie Edit, RAW
This image cannot be Development, or Save as Manual WB for
processed images captured with other cameras, or
when you try to perform Resize or
Cropping for minimum file size images.
The camera failed The creation of an index print image
to create an image failed.
Description