P' (Download N Th Stored Barcode) - KoamTac KDC100 Programming Manual

'p' (Download n
Parameters: The number which indicates the position of barcode data to be sent
Format: 'p<value>#' where <value> is the number of barcode data stored in the internal flash
to upload in hexadecimal and # means the end of <value>. The first stored barcode
location is "0", not "1"
Barcode Position
Output: A multi-byte string defined in the following note.
Purpose: Get the Nth barcode data stored in KDC100 memory. 'p' command does not erase the
barcode in memory.
[Note]
Where:
S : Start byte 0x03(1 byte)
N : Total number of bytes to be sent(3 bytes)
C : Total number of each barcode data(1 byte)
Y : Type of each barcode(1 byte)
−
Bit 0 ~4 : Barcode type
Symbology
EAN13
EAN8
UPCA
UPCE
Code39
ITF14
Code128
I2of5
Codabar
−
Bit 5 : 1 if matching slave data, 0 if mismatching slave data
−
Bit 6 : 1 if master data, 0 if slave data
stored barcode)
th
Character
0~9 "0" ~ "9"
10~15 "A" ~ "F"
16~25 "1","0" ~ "1","9"
26~31 "1","A" ~ "1","F"
...
10240 "2","8","0","0"
S N C
bit#
0
1
2
3
4
5
6
7
8
Hex No.
30 ~ 39
41 ~ 46
31,30 ~ 31,39
31,41 ~ 31,46
...
32,38,30,30
Y D T K
Symbology
EAN128
Code93
Code35
BooklandEAN
EAN13withAddon
EAN8withAddon
UPCAwithAddon
UPCEwithAddon
49
KDC100 Programming Manual
...
bit#
9
10
11
12
13
14
15
16