O' (Read Barcode Option) - KoamTac KDC100 Programming Manual

'o' (Read barcode option)

Parameters: None
Format: 'o'
Output: '<value>@' where <value> is the selected barcode options in hexadecimal and @ means
the end of <value>
Purpose: To get the barcode options saved in KDC100. Please see the table of command 'O' for the
detailed explanation of options
[Example] Output: 0xFF, 0xFF, 0xFF, 0xFF, 0x40
0xFFFFFFFF: All options are enabled
0x40: ASCII code of character "@" in hexadecimal
KDC100 Programming Manual
46