Table of Contents
Advertisement
Changing the input signal
The input source for picture signals can be changed by
pressing the INPUT Buttons on the projector operating panel
or on the remote control unit.
INPUT
(LCD Projector)
R G B
Y P
P
B
S - V I D E O
V I D E O
Downloaded From projector-manual.com Panasonic Manuals
Previous
screen
INPUT
or
(Remote
Control unit)
R
Continued on the next page...
Press the INPUT Buttons
The signal from the source which is
connected to the RGB/YP
connector is projected.
This terminal accepts input of RGB
input signals from a personal computer
and DTV Format signals (RGB,
YP
P
) from a DVD or a digital
B
R
broadcast. No monitor or projector can
automatically decide whether a
Component signal is the RGB-type or
the YP
P
-type.
B
R
select either RGB or YP
The signal from the source which is
connected to the S-VIDEO IN
connector or VIDEO IN connector is
projected.
If cables are connected to both
connectors, the S-VIDEO signal will be
selected automatically. (The S-VIDEO
signal has priority.)
P
IN
B
R
So, you will have to
P
manually.
B
R
39
Hide quick links:
Advertisement
Table of Contents
