Table of Contents
Advertisement
Adjusting the Image Position, Dot Clock and
Phase
Confirm the picture position, Dot Clock, and Phase. If the
picture is not correctly positioned within the display area of
the screen (the edge of the picture does not appear), adjust
the picture position. The items which can be adjusted will vary
depending on the type of input signal.
The procedure and on-screen display as shown below are
based on RGB as the input signal from a personal computer.
• When adjusting the
1
Press MENU to
display the menu.
2
Press
or
select
"Synchronization",
and then ENTER to
display the screen.
3
Press
or
select "H Position".
• When adjusting the
Vertical Position,
Dot Clock, and
Phase, move the
arrow to the item
you want to adjust.
4
Press
or
the H Position setting.
• The current setting
will be displayed on
the screen by
numerals and a bar.
Downloaded From projector-manual.com Panasonic Manuals
Previous
screen
Horizontal
to
to
H Position
V Position
Dot Clock
Phase
Standard (Push ENTER)
to adjust
Continued on the next page...
Position (H Position)
Picture
White Balance
Synchronization
Function
Language
Information
Synchronization
49
27
900
15
45
Hide quick links:
Advertisement
Table of Contents
