Adjusting The Lcd Projector Projection Angle - Panasonic PT-LC50E Operating Instructions Manual

Adjusting the LCD Projector projection angle

Adjusting the LCD Projection angle of the LCD Projector.
When the projector is in the horizontal position, keystone
correction is unnecessary and a correct image can be viewed.
Using the simple stand
While lifting up the front of the
projector, pull down the simple stand
located underneath the unit.
Note
The LCD Projector detects whether the Simple Stand is
down or up and automatically corrects keystone distortion
when the KEYSTONE Button is pressed.
Caution:
Never pick the unit up by the simple stand.
Using the swivel stand
1
Slide the TIGHTEN Knob to
the LOOSEN position.
2
Adjust to the desired projection
angle. If necessary, you can also tilt
to the right or left.
3
Slide the TIGHTEN Knob to
the TIGHTEN position.
Downloaded From projector-manual.com Panasonic Manuals
Previous
screen
FRONT
(Top view)
FRONT
(Top view)
41