Table of Contents
Advertisement
Important Safeguards
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT
CAREFULLY.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience. A 13 amp fuse is
fitted in this plug. Should the fuse need to be replaced, please
ensure that the replacement fuse has a rating of 13 amps and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
the fuse.
If the plug contains a removable fuse cover, you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket
outlet in your home, then the fuse should be removed and
the plug cut off and disposed of safely. There is a danger
of severe electrical shock if the cut off plug is inserted
into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as
shown below.
If in any doubt, please consult a qualified electrician.
Downloaded From projector-manual.com Panasonic Manuals
Previous
screen
or the BSI mark
Continued on the next page...
on the body of
9
Hide quick links:
Advertisement
Table of Contents
