Conference Calls - Telstra commander E105 User Manual

Paging and Conl e rence Cal l s

Conference Calls

Conference calls can be conducted between an outside party and two stations, or
between three stations.
Conference with an Outside Party
To Set Up a Conference Call with an Outside Party:
Ask the outside party to wait
l
Press [CONF]
l
Press required DSS key [l-8]
l
The [LINE] lamp flashes slowly.
The intercom lamp glows steadily at all other stations.
The outside party is placed on hold and hears music.
Ask the new party to wait
l
Press [CONF].
l
The [LINE] lamp flashes rapidly.
All parties are connected to the conference call.
The intercom lamp extinguishes.
If the person at the station is busy, does not answer or does not wish to join the
conference, you can return to the outside party by pressing the flashing [LINE].
Press [CONFERENCE] again and press another DSS key to try another station.
If one of the stations leaves the conference, the [LINE] lamp will change to a
steady glow.
Page 5 4
Intercom Conference
To Set Up an Intercom Conference Call:
l
l
l
l
l
l
(If
programmed.)
Commander ElW208t Sysl e m User Gurde
Ensure that the intercom lamp is extinguished
Lift the handset
Press required DSS key [l-8]
The intercom lamp glows steadily at all other stations.
Ask the party to wait
Press [CONF]
Press the second DSS key [l-8].
When the call is answered, the conference call is automatically
connected.
Page 5- 5