Call Transfer; Call Conference - Telstra commander E105 User Manual

Call Transfer

Refer to Centel User Guide for a complete description of this feature.
To Transfer Exchange Call:
Press [RECALL]
l
Dial number to which the call is to be transferred
l
Speak to the called party
l
The dial sequence 'recall 4' is sent to line.
Replace the handset.
l
To Cancel Exchange Call Transfer if Called Party Does Not Answer:
Press [RECALL]
l
The call transfer feature may only be used in conjunction with other system call
handling functions, on stations programmed as 'unrestricted'. If used in
conjunction with other call handling functions on restricted stations, the access
barring system will not allow dialling to the transfer number.
Page 6- 8

Call Conference

Refer to Centel User Guide for a complete description of this feature.
To Establish Conference Call While on an Exchange Call:
Press [RECALL]
l
Dial the second number which is to be included in the conference call, or
l
press speed dial
Press [PAGE].
l
The dial sequence 'recall 3' is sent to line.
Conversation in now possible between all three parties.
The call conference feature may only be used in conjunction with other system
call handling functions, on stations programmed as 'unrestricted'. If used in
conjunction with other call handling functions on restricted stations, the access
barring system will not allow dialling to the wanted conference number.
Commander E105/208t System User Gude Page 6- 9