Off-Hook Dialling - Telstra commander E105 User Manual

Intercom Calls
Intercom Signal Call
To Make an Intercom Call that will Ring at the Called Station:
Ensure that the intercom lamp is extinguished
l
Lift the handset
l
Press required DSS key [l-8]
l
The intercom lamp glows steadily at all other stations.
Hear the intercom ring tone
l
Speak when called party answers.
l
If the called station is busy or in Do Not Disturb mode, you hear a busy tone.
Intercom Voice Call
To Make an Intercom Call in which your Voice Sounds Through the Called
Station's Speaker:
Ensure that the intercom lamp is extinguished
l
Lift the handset
l
Press required DSS key [l-8]
l
The intercom lamp glows steadily at all other stations.
Press DSS key again [l-8]
l
Hear a short beep
l
Page the called party.
l
Outside Calls

Off-hook Dialling

To Make an Outside Call with the Handset Off-hook:
Lift the handset
l
Press a free [LINE]
l
The selected [LINE] lamp glows steadily at all stations.
Hear the dial tone
l
Dial the required number
l
Speak when the called party answers.
l
On-hook Dialling
To Initiate an Outside Call Using the On-hook Facility:
Press a free [LINE] without lifting the handset
l
The [SPKR] lamp glows steadily at your station.
The selected [LINE] lamp glows steadily at all stations.
Hear the dial tone through the station speaker
l
Dial the required number
l
. Lift the handset to speak when the called party answers.
The [SPKR] lamp extinguishes.
To Cancel an Outside Call Made with the On-hook Facility if the Called Party
is Busy or Does Not Answer:
Press [SPKR].
l
The [SPKR] lamp extinguishes.
The selected [LINE] lamp extinguishes.