Panasonic KX-TDE100 Installation Manual page 35

Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version,
follow the procedure below:
While starting up
PROGRAM
Select
"Maintenance".
SP-PHONE
Power Supply Unit Selection
The PBX needs a power supply unit (PSU) suitable for its configuration. Calculate the load figure from the type
and number of items of equipment to be connected, and determine the type of PSU that will be required.
Load Figure Calculation
PT
Extension Card
*1
PT-interface CS (2-channel)/CS for CSIF card (1 unit)
PT-interface CS (8-channel) (1 unit)
IP-CS (8-channel) (1 unit)
VPS (1 port)
*1 Only the extension cards that can support SLTs count for the load figures.
Document Version 2010-08
SP-PHONE
Select
"Version display".
To exit the programming mode
HOLD
Software version
is displayed.
Equipment Type
KX-DT300 series DPT/KX-DT300 series DSS
console/KX-T7600 series DPT/KX-T7600 series
DSS console
Other DPT/Other DSS console
APT
IP-PT
SIP Extension
DHLC8
SLC8
SLC16/MSLC16/CSLC16
SP-PHONE
"AP Version".
HOLD HOLD HOLD
1.3.3 System Capacity
Load Figure
1
4
4
0
0
8
8
16
4
8
0
1
Installation Manual 35