Technical Characteristics - BaltGaz LUX User Manual

Hide thumbs

Table Of Contents

Table of Contents

2.2.1. Rated heating power, kW

2.2.2. Rated heating effect, kW

2.2.3. Rated heating power of the ignition burner, kW, not more than,

2.2.4. Gas type

2.2.5. Family; gas group

2.2.6. Rated gas pressure, kPа (mm w.g.):

NG (G20, 2

family, group H)

2.2.7. Rated gas consumption , m

LPG (G30, 3family, group B/P)

NG (G20, 2

family, group H)

2.2.8. Performance index, %, not less than

2.2.9. Supplied water pressure for the appliance's normal operation, kPa

LPG (G30, 3family, group B/P)

2.2.10. Maximal water pressure (at water's heat expansion the pressure must not exceed

this value), kPa

2.2.11. Minimal water flow (for ignition), l/min

2.2.12. Minimal water pressure (for ignition), not more than, kPa

2.2.13. Water consumption at heating for Δ=40 °С, l/min

2.2.14. Water consumption at heating for Δ Т=25 °С, l/min

2.2.15. Required rarefaction in the exhaust flue, Pа (mm w.g.),

Not less than

2.2.16. Mass consumption of combustion products NG/ LPG at rated heating power,

Not more than

g/s

2.2.17. Average temperature of combustion products, С

2.2.18. Minimal allowable inlet gas pressure at the appliance's operation, Pa (mm w.g.)

2.2.19. Combustion products temperature, °С, not more than

2.2.20. Appliance's ignition type

2.2.21. Appliance's overall dimensions, mm:

Height

2.2.22. Weight of appliance, NET /GROSS, kg, not more than

Width

2.2.23. Diameter of the nozzles of the main burner, mm :

Depth

NG 1,3 kPа (G20, 2

2.2.24. Diameter of the nozzles of the ignition burner, mm :

2,0 kPa

NG (G20, 2

family, group H)

LPG 2,9 kPа (G30, 3

2.2.25. Type and voltage of power element, V

2.2.26. Continuous operation with one power element, h

LPG (G30, 3

family, group B/P)

* Reference parameters for p. 2.2.13, 2.2.14 - at water pressure at least 250 kPа by the inlet into the operating

appliance;, for. 2.2.26 - when using alkaline power elements with high energy output ratio.

Main particularities of the appliance:

The appliance is automatically switched on when the hot water tap is opened (at water consumption

more than 2,5 l/min);

The ignition burner automatically switches off after the main burner ignites;

The appliance keeps (within the bounds of its heating effect) the set hot water temperature when water

consumption, inlet water temperature and gas pressure is changed:

On the digital display there is shown the temperature of water running out of the appliance and the

temperature set by pressing the control buttons;