Table of Contents
Advertisement
Section 4 - Configuration
This section allows you to configure how the DSL-2745 uses Wi-Fi Protected
Setup (WPS) to create a secure wireless connection.
WIFI PROTECTED SETTINGS
Check the box to Disable WPS.
WPS Status:
WPS is configured by default.
Self-PIN Number:
Enter a 4 or 8 digit WPS pin, or click Regenerate PIN to create a
new random WPS PIN.
Click Start PIN to activate the WPS-PIN (PIN) method. You will then
PIN Configuration:
have 120 seconds to connect an enter the PIN on your device.
Click Start PBC to activate the WPS-PBC (push-button) method. You
Push Button
Configuration:
will then have 120 seconds to press the WPS button on the new device
that you wish to connect.
Click Apply Changes when you are done or click Reset to undo any changes
you may have made.
This box shows the type of Authentication, Encryption, and wireless key.
Some wireless configuration utilities on client devices allow you to generate a WPS PIN. This
can be useful in various situations, such as to ensure that you are adding the correct wireless
device to your network. To use this feature, create a PIN on your wireless client, enter it into
the Client PIN Number box, and click Start PIN.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Wi-Fi Protected Setup
CURRENT KEY INFO
CLIENT PIN INFO
64
Hide quick links:
Advertisement
Table of Contents
