Table of Contents
Advertisement
Section 4 - Configuration
The Advanced LAN settings page allows you to configure the LAN ports of your
DSL-2745. This page allows you to manually configure the Speed and Duplex
Mode of your Ethernet connections. You can also limit connections to your LAN
and WLAN based on MAC address.
LAN LINK MODE SETTINGS
LAN Port:
Select the LAN port to modify. The options are LAN1, LAN2, LAN3,
and LAN4.
Link Speed/
Select the link speed and duplex mode. The options are 100 Mbps/
Duplex Mode:
Full Duplex, 100 Mbps/Half Duplex, 10 Mbps/Full Duplex, 10
Mbps/Half Duplex, or Auto Negotiation.
The Ethernet Status Table displays the current Ethernet LAN configuration.
MAC ADDRESS CONTROL SETTINGS
MAC Address
Select the LAN interfaces to apply the MAC address control to. The
Control:
options are LAN1, LAN2, LAN3, LAN4, and WLAN.
Add your client device MAC addresses below, then select the interfaces to apply MAC Address
Control to, and click Apply Changes.
New MAC
Enter the MAC address of your client devices and click Add.
Address:
CURRENT ALLOWED MAC ADDRESS TABLE
This list displays the currently allowed devices, listed by their MAC address. If you wish to
remove a device, click the Delete button. Take care when removing devices so you don't
accidentally block your configuring device.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Advanced LAN
58
Hide quick links:
Advertisement
Table of Contents
