Table of Contents
Advertisement
Section 4 - Configuration
Local IP Address:
Enter your local IP address.
Remote IP
Enter your default gateway.
Address:
Netmask:
Enter your subnet mask.
This defaults to Auto.
Default Route:
Unnumbered:
This option is unavailable.
Configure the IPv6 WAN settings. If the IP Protocol is set to IPv4,
IPv6 WAN
Settings:
these settings are unavailable.
Select either Slaac or Static.
Address Mode:
IPv6 Address:
Enter your IPv6 Static Address. Only available in Static mode.
IPv6 Gateway:
Enter your IPv6 Gateway. Only available in Static mode.
DHCPv6 Mode:
Select either Auto, Enable, or Disable.
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
Address:
Enable or Auto:
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
PD:
Enable.
Click Add to create your connection.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
1483 Routed Mode Continued
37
Hide quick links:
Advertisement
Table of Contents
